Multitech RouteFinder RF850 Guía de usuario descargar pdf (Pagina 35)

Chapter 4 – Configuration Examples

Multi-Tech Systems, Inc. RouteFinder RF850/860 User Guide (PN S000400E) 35

Example 2, Side B

VPN Setup (Continued)

The Add IKE Connection screen displays. All settings can be left at the default unless otherwise

indicated:

1. Connection Name: Enter the name of the VPN tunnel you want to create. For this example,

enter Behind-NAT.

2. Secret: Enter the Secret password (which has to match on both ends of the tunnel). For this

example, enter test.

3. Select Encryption: Select 3DES.

4. Local WAN IP: Select WAN.

5. Local LAN: Select LAN.

6. Remote Gateway IP: Select RF850-WAN.

7. Remote LAN: Select RF850-LAN.

8. UID: Click the Enable button (must be enabled when using NAT).

9. Local ID: Enter the local security gateway ID (required when using NAT). For this example,

enter 65.126.90.248

10. Remote ID: Enter the remote security gateway ID (required when using NAT). For this example,

enter 192.126.2.8

11. Click the Save button to save your tunnel.

The VPN > IPSec Status screen displays; this time showing the newly-created VPN tunnel.

mportant Note:

ake sure to

check the

Status box for

this VPN tunnel

in order to

activate it.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 189 190

Sin comentarios

Multitech RouteFinder RF850 Guía de usuario Pagina 35