Multitech MT5634ZBA-USB Guía de usuario descargar pdf (Pagina 39)

Chapter 5 - Remote Configuration

Changing the Remote Escape Character

To increase security, you can change a remote modem’s remote configuration escape

character. The remote configuration escape character is stored in register S9. The

factory default is 37, which is the ASCII code for the percent character (%). Setting S9 to

0 (zero) disables remote configuration entirely—but if you do this remotely, you won’t be

able to change it back remotely!

1. Establish a remote configuration link with the remote modem as described in “Basic

Procedure.”

2. Type ATS9=n, where n is the ASCII code for the new remote configuration escape

character, then press ENTER.

3. Save the new value by typing AT&W and pressing ENTER.

4. Type ATO<CR> to exit remote configuration.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 61 62

Sin comentarios

Multitech MT5634ZBA-USB Guía de usuario Pagina 39