Multitech MT2834MR6 Guía de usuario descargar pdf (Pagina 105)

105

Appendix

At end of dial Continuous Redial

command Colon; causes continuous redial of number until answered (10 in North American

models). Not used in U.K. or International models.

;

At end of dial Return to Command Mode After Dialing

command Semi-colon; causes immediate return to command mode after dialing.

In dial Flash On-Hook

command Exclamation; causes modem to flash on-hook.

In dial Quiet Answer

command Causes modem to wait for a ringback, then 5 seconds of silence before processing

next part of command.

In dial Call Card Tone Detect

command Causes modem to wait for a call card tone before processing next part of command.

+++AT<CR>

Escape Sequence

Puts modem in command mode while still remaining on line. Type +++ followed by the

letters A and T, up to ten command characters (or as defined by

S34

), and a

RETURN.

Break Escape Sequence

Alternate escape method. Puts modem in command mode while still remaining on line.

Enter break signal followed by the letters A and T, up to sixty command characters,

and a RETURN.

%%%AT<CR>

Remote Configuration Escape Sequence

Cause remote modem to display remote configuration menu. Type %%% (or as

defined in register S13) followed by the letters A and T, and a RETURN.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 122 123

Sin comentarios

Multitech MT2834MR6 Guía de usuario Pagina 105