Multitech MT4X56USB Guía de usuario descargar pdf (Pagina 68)

MultiModemUSB User Guide

MT4X56USB68

Step 6: Upgrade the Modem’s Firmware

At various times, Multi-Tech may add enhancements and/or fixes to the modem firmware. Flash

technology allows you to load these upgrades into the PROM. Do the following.

1. Download FLASHPRO.ZIP and a new .HEX file from the Multi-Tech FTP or Web site.

2. Unzip the FLASHPRO.ZIP file. Place this unzipped file and the .HEX file in the same directory.

3. Run FlashPro by typing FLASHPRO, a space, and hitting ENTER at the DOS prompt.

4. Highlight the "Configure" option in the MAIN MENU and hit ENTER. Highlight "Active Port" and

select the COM port to which you have your modem attached. Highlight "Baud Rate" and select

the rate you want to program at. Hit ESC when finished.

5. Highlight the "Select File to Program" option in the MAIN MENU. Highlight the .HEX file. Hit ESC

when finished.

6. Highlight "Program Firmware" option in the MAIN MENU. When you are prompted to confirm the

file to program, press "Y".

7. If you need more assistance programming FLASHPRO, contact our Technical Support

department.

Step 7: Restore Your Parameters

Your modem is now updated. You can now open your terminal program to reprogram your modem

parameters, if necessary, or to confirm the update by typing ATI in the terminal window.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 95 96

Sin comentarios

Multitech MT4X56USB Guía de usuario Pagina 68