Multitech MMH900 Guía de usuario Pagina 174
- Pagina / 200
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
174
Appendix J - Internal MMH2834 Composite Link Modem Commands
Five different X commands are available (X0 through X4), with
five different effects on the MMH2834’s Result Codes.
X0 Provides the basic (short) result codes and provides
“dumb” dial capabilities.
X1 Provides the extended result codes and provides “dumb”
dial capabilities.
The remaining X commands affect Call Progress, and turn on
Extended Result Codes.
X2 Looks for dial tone only and will not provide a busy
response.
X3 Looks for busy only and not look for dial tone.
X4 Looks for dial tone and for busy.
The factory default setting is X0, which selects Basic Result
Codes and the blind (“dumb”) method of dialing.
- MMH900 Series Statistical 1
- Multiplexer 1
- User Guide 1
- S000315A Revision A 2
- Contents 3
- Description 7
- 1.1 Introduction 8
- 1.2 About This Manual 8
- 1.3 Background 10
- 1.3.1.2 Communications 12
- 1.4 Product Description 13
- 1.5 System Features 16
- 1.5.1 Response Time Control 16
- 1.5.2 Dynamic Buffering 16
- 1.5.3 Flow Control 17
- 1.5.4 Diagnostics 17
- Reporting 18
- 1.5.7 Parameter Memory 18
- 1.5.8 Channel Flexibility 18
- 1.5.9 Command Modem 18
- 1.5.10 Composite Link 19
- Interconnection 20
- 1.7 DOC Terminal Equipment 22
- 1.8 Specifications 23
- 1.8.1 Channels 23
- 1.8.2 System Control 23
- 1.8.3 Composite LInk 24
- 1.8.4 33,600 bps Link Modem 24
- 1.8.5 56,000 bps DSU 24
- 1.8.6 ISDN Terminal Adapter 25
- 1.8.7 Command Modem 25
- 1.8.8 Electrical/Physical 25
- Chapter 2 - Configuration 26
- 2.1 Introduction 27
- 2.2 Configuration 1 28
- 2.3 Configuration 2 30
- 2.4 Configuration 3 31
- Descriptions 33
- 3.1 Introduction 34
- 3.2 Front Panel 34
- 3.3 LED Indicators 35
- Internal Composite Link (DSU) 37
- Internal Link Device (Modems) 38
- COMPOSITE LINK 39
- 3.5 Switches/Jumper/Shunt 41
- 3.5.1 8-Position DIP Switch 41
- 3.5.2 4-Position DIP Switch 42
- 3.5.3 144RKWL/OtherJumper 43
- 3.5.4 V.24/V.35 Shunt 43
- Chapter 4- Installation 44
- 4.1 Introduction 45
- 4.2 Safety Warnings 45
- 4.3 Unpacking 45
- RS232C/V.35 46
- INTERNAL 46
- V.35 V.24 47
- Supervisory Console 48
- Channels 49
- Parameters (&W) command 50
- Chapter 4 - Installation 50
- Chapter 5 - Commands 51
- 5.1 Introduction 52
- 5.2 Command Description 57
- 5.2.1 General Commands 57
- The H1 Menu is as follows: 59
- The H2 Menu is as follows: 60
- UP = 16/32 MM 60
- DN = 900 MMH/MMV 60
- The H3 Mend is as follows: 61
- The H4 Menu is as follows: 61
- The H5 Menu is as follows: 62
- The H6 Menu is as follows: 62
- The H7 Menu is as follws: 63
- The H8 Menu is as follows: 63
- CHANNEL DEVICE 66
- INITIATED PACING 66
- MultiMux 67
- 5.2.3 Composite Link Commands 73
- LINE LOAD TYPE TIMER TIME 75
- OFF INTERNAL 10ms 3 75
- 5.2.8 Test Commands 86
- 5.2.9 Command Modem commands 88
- Chapter 6- Operating 89
- Procedures 89
- 6.1 Introduction 90
- Chapter 7 - Troubleshooting 96
- 7.1 Introduction 97
- 7.3 Test Cables 98
- Composite Link 99
- Loopback Cable 99
- 7.4 Troubleshooting Guide 100
- Channel device losing data 105
- 7.5 Channel Device Testing 106
- Procedure 107
- Technical Support 111
- 8.1 Introduction 112
- 8.2 Warranty 112
- Customers 113
- Distributors 115
- Appendices 116
- Appendix A 117
- Appendix B 118
- Appendix C - Cabling Diagrams 120
- Channel Cables 120
- Command Port Cables 121
- Appendix D 124
- Command Modem Commands 124
- Appendix F 142
- Flow Control Background 142
- MiniComputer Flow Control 143
- Appendix G 145
- MMH2834 S-Registers 145
- Appendix H 148
- Dial Back-up 148
- Appendix I 149
- Testing Your MMH2834 149
- I.1 Introduction 149
- Local MultiModem 150
- Type ATU0 or ATU1; hit ENTER 150
- Digital Analog DigitalAnalog 151
- I.5 Synchronous Mode Testing 155
- Digital Analog 156
- AnalogDigital Analog 157
- DigitalAnalogDigital Analog 158
- Modem Commands 159
- J.1 Introduction 159
- #S Change SETUP Password 161
- J.1.1 Dialing Action Commands 162
- J.1.2 Dial Modifier Commands 164
- Commands 171
- Immediate Action Commands 182
- Glossary 184
- S000315A 200
Relacionado con productos y manuales para Redes Multitech MMH900
Redes Multitech RouteFinder MTASR3 Manual de usuario
(33 paginas)
(33 paginas)
Redes Multitech MVP200 Guía de usuario
(44 paginas)
(44 paginas)
Redes Multitech MA30120 Guía de usuario
(29 paginas)
(29 paginas)
Redes Multitech MTCMR-G2 Guía de usuario
(29 paginas)
(29 paginas)
Redes Multitech FaxFinder FF840 Manual de usuario
(24 paginas)
(24 paginas)
Redes Multitech MTPSR1-202ST Guía de usuario
(104 paginas)
(104 paginas)
Redes Multitech MT5634ZBAV.90 Manual de usuario
(13 paginas)
(13 paginas)
Redes Multitech MultiVOIP 100 MVP120 Guía de usuario
(89 paginas)
(89 paginas)
Redes Multitech RouteFinder MTASR3 Guía de usuario
(44 paginas)
(44 paginas)
Redes Multitech FaxFinder FF240 Especificaciones
(108 paginas)
(108 paginas)
Redes Multitech MT128ZLX-ST/NT Manual de usuario
(39 paginas)
(39 paginas)
Redes Multitech MT5634ZBA-VV.90 Guía de usuario
(8 paginas)
(8 paginas)
Redes Multitech MT202TD Guía de usuario
(28 paginas)
(28 paginas)
Redes Multitech MTCMR-H Guía de usuario
(36 paginas)
(36 paginas)
Redes Multitech MTCMR-E Guía de usuario
(54 paginas)
(54 paginas)
Redes Multitech MT5600BA Guía de usuario
(8 paginas)
(8 paginas)
Redes Multitech MT2834MRK Manual
(31 paginas)
(31 paginas)
Redes Multitech GFU19 Manual de usuario
(152 paginas)
(152 paginas)
Redes Multitech MT5600SMI-XL34 Especificaciones
(157 paginas)
(157 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.082 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales