Multitech GPRS Manual de usuario descargar pdf (Pagina 18)

Chapter 3 – SMTP/POP3 Email Services

Multi-Tech Systems, Inc. AT Commands for Wireless Modems with IP Connectivity (S000333B) 18

#POP3PORT Set POP3 Server

Definition: To reach the POP3 server, the TCP/IP stack software must know the port of the POP3 server used for

retrieving email.

Note: This parameter should be changed only by your network administrator since it depends on

network infrastructure configuration including firewalls, proxy or specific TCP port translation settings.

Values: 5 digits (each digit between 0 and 9 inclusive). Note that numbers above 65,535 are illegal as the port

identification fields are 16 bits long in the TCP header. Default 110.

Syntax: Set Value: AT#POP3PORT=<value>

Get Value: AT#POP3PPORT? or AT#VPOP3, AT#VALL

#POP3PW Set POP3 Password

Definition: Password for POP3 account. To retrieve email messages sent to a specified email address, the TCP/IP

stack software must know the POP3 password that has been set for that email account.

Values: Alphanumeric ASCII text string up to 64 characters. No default.

Syntax: Set Value: AT#POP3PW=<value>

Get Value: AT#POP3PW? or AT#VPOP3, AT#VALL

#POP3SERV Set POP3 Address

Definition: To retrieve email messages, the TCP/IP stack software must know the address of the POP3 server that

is to be used. The POP3 server must be the one where the specified email account is hosted (which is

not necessarily maintained by the local ISP).

Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx) or

Alphanumeric ASCII text string up to 120 characters if DNS is available. No default.

Syntax: Set Value: AT#POP3SERV=<value>

Get Value: AT#POP3SERV? or AT#VPOP3, AT#VALL

#POP3UN Set POP3 User Name

Definition: User name for POP3 account. To retrieve email messages sent to a specified email address, the

TCP/IP stack software must know the POP3 user name that has been set for that email account.

Values: Alphanumeric ASCII text string up to 64 characters. No default.

Syntax: Set Value: AT#POP3UN=<value>

Get Value: AT#POP3UN? or AT#VPOP3, AT#VALL

#SMTPPORT Set SMTP Server Port

Definition: To reach the SMTP server, the TCP/IP stack software must know the port of the SMTP server used for

sending email.

Note: This parameter should be changed only by your network administrator since it depends on

network infrastructure configuration including firewalls, proxy or specific TCP port translation settings.

Values: From 1 to 5 digits (each digit between 0 and 9 inclusive). Note that numbers above 65,535 are illegal

as the port identification fields are 16 bits long in the TCP header. Default 25.

Syntax: Set Value: AT#SMTPPORT=<value>

Get Value: AT#SMTPPORT? or AT#VSMTP, AT#VALL

#SMTPPW Set SMTP Password

Definition: To send email messages, some SMTP servers are using an authentication process. In these cases, the

TCP/IP stack software will provide the SMTP password (associated to the SMTP user name) for the

email sending process.

If this parameter is an empty string, the authentication mode is inactive.

If both this parameter and the SMTPUN parameter are not empty, the authentication mode is active.

Values: Alphanumeric ASCII text string up to 64 characters. No default.

Syntax: Set Value: AT#SMTPPW=<value>

Get Value: AT#SMTPPW? or AT#VSMTP, AT#VALL

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

Comentarios a estos manuales

Sin comentarios

Multitech GPRS Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech GPRS