Multitech ISIHP-4U Manual de usuario descargar pdf (Pagina 17)

Doc # 82099300 MultiTech ISIHP-1S Product Update

ISIHP-1S Page 17 of 17 MultiTech ISI Server Card

Installing the ISIHP-1S under Netware

When the driver is installed, it will allocate 8 consecutive ports to the ISIHP-1S. Upon

inspection, the Netware OS will initialize the first pair of ports (terminal adapters), label the

second pair of ports “broken,” initialize the third pair of ports (modems), and label the fourth

pair “broken.” After installation of the ISIHP-1S card is complete, the “broken” ports can be

allocated to a different purpose. See the ISIHP-2S/2U/4S/4U//4SD User Guide for general

instructions on ISIHP installation under Netware.

Installing the ISIHP-1S under SCO Open Server 5

In the MultiTech Installation Script, specify 8 pseudo-devices for the ISIHP-1S card. Only

four of these pseudo devices will actually be used (the first pair, ttyl1A and ttyllB will be used

as terminal adapters; the third pair, ttyl1E and ttyl1F, will be used as modems). The remaining

four ports (the second pair and the fourth pair) are not used and can be allocated to a different

purpose after the ISIHP-1S installation is complete.

You must initialize each of the four active ports separately using the enable command. See

the ISIHP-2S/2U/4S/4U//4SD User Guide for general instructions on ISIHP installation under

SCO Open Server 5.

Installing the ISIHP-1S under Linux

To view busy I/O address space on your system, enter:

cat /proc/ioports

Device files corresponding to ports on the ISIHP cards are created in the /dev folder. Use

ttyMxy for normal ports and cumxy for corresponding callout ports. Normal ports (ttyM) are

configured for dial-in connections. Callout ports (cum) are used for dial-out connections.

In these expressions (ttyMxy and cumxy), the letter x is the card number (1–4), and y is the

port designator (a, b, c, …). The ISIHP-1S is treated as an eight-port card with only four ports

in use.

As an example, consider an ISIHP-1S that is the first expansion serial card in the computer.

Ports ttyM1a and ttyM1b are terminal adapter ports; ports ttyM1e and ttyM1f are modem

ports. Ports ttyM1c, ttyM1d, ttyM1g, and ttyM1h are unused and can be allocated to a

different purpose after the ISIHP-1S installation is complete.

See the ISIHP-2S/2U/4S/4U//4SD User Guide for general instructions on ISIHP installation

under Linux.

1 2 ... 12 13 14 15 16 17

Sin comentarios

Multitech ISIHP-4U Manual de usuario Pagina 17