Multitech MT5600BA Guía de usuario descargar pdf (Pagina 4)

MultiModemII Quick Start Guide

Connect the Modem to Your PC

Plug one end of the serial cable into the RS-232 connector on the

modem and plug the other end into a serial port connector on your

computer, such as COM1 or COM2.

Connect the Modem to the Telephone Line (Dialup Connection)

Plug one end of the modular phone cable into the modem’s LINE

jack, and the other end into a public switched telephone network

(PSTN) wall jack.

Important: The LINE jack and PHONE jack are not

interchangeable. Do not plug the phone into the LINE jack. Do not

plug the line cable into the PHONE jack.

Note: Regulatory agencies may impose certain restrictions on

equipment connected to public telephone systems.

Connect the Two-Wire Leased Line

MT5600BA – Plug one end of a two-wire phone cable into the

modem’s

LINE jack; connect the other end to a leased line wall jack

or terminals.

MT5600BL – Plug one end of a two-wire phone cable into the

modem’s

LEASED jack; connect the other end to a leased line wall

jack or terminals.

Connect the Four-Wire Leased Line

MT5600BL Only – Plug one end of a four-wire phone cable into

the modem's

LEASED jack; connect the other end to a four-wire

leased line wall jack or terminals.

Modems with a leased-line jack support the dial backup feature. For

dial backup operation, plug one end of your dialup modular phone

cable into the modem’s

LINE jack and the other end into a PSTN

wall jack.

Connect the Phone to the Modem (Optional)

For voice-only calls, plug a telephone into the modem’s PHONE

jack.

Connect the Modem to the AC Power Outlet

Plug the transformer module into an AC power outlet or power strip.

Plug the transformer module’s cable into the modem's POWER jack.

Note: Use only the transformer module supplied with the modem.

Use of any other module voids the warranty and can damage the

modem.

1 2 3 4 5 6 7 8

Sin comentarios

Multitech MT5600BA Guía de usuario Pagina 4