Multitech MT5656ZDX Series Guía de usuario descargar pdf (Pagina 18)

Chapter 2 – AT Commands

Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273G) 18

Command: -QCPC Force Full Startup Procedure Next Connection

Description: This command causes the modem to use full startup procedures on the next connection

attempt regardless of the setting of the +PQC command. After this attempt, the modem

will select the startup procedure as defined by the +PQC command. If a shortened

startup procedure is enabled by +PQC, then the quick connect profile will also be

updated on the next connection attempt.

Syntax: -QCPC

Result Code: OK

ERROR Otherwise

Command: -QCPS Enable Quick Connect Profile Save

Description: This command controls whether or not the modem will save the generated quick

connect profile.

Syntax: -QCPS=<value>

Values: 0, 1

<value> Decimal number corresponding to the desired operation.

0 Do not allow the quick connect profile to be saved.

1 Allow the quick connect profile to be saved. Default

Result Codes: OK 0 or 1 in V.92 Mode (+MS=V.92) and quick connect is enabled (+PSS = 0)

ERROR Otherwise

Report Commands: -QCPS? Reports selected value

-QCPS=? Reports supported range of parameter values

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 54 55

Sin comentarios

Multitech MT5656ZDX Series Guía de usuario Pagina 18