Multitech MultiConnect Adapter Guía de usuario descargar pdf (Pagina 81)

Chapter 9 – Modem (Transparent) Mode

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 81

Chapter 9 – Modem (Transparent)

Mode

Introduction

In the modem mode (also called transparent mode), raw data is communicated between serial ports 1

and 2. This means that:

• Data received on serial port S0 is transmitted on serial port S1

• Data received on serial port S1 is transmitted on serial port S0

Transparent mode can be used in the following applications:

• The MultiConnect IP is used as a Modem

• Serial Tunneling

Prerequisites

• Transparent Mode must be enabled

# set operation-mode modem

• Host Interaction mode must be disabled

# set serial s0 host-interaction-mode disable

• Enable Switching-between Data mode and Command mode

# set serial s0 escape-monitor enable

• Set the Escape-Monitor-String to switch between Data mode and Command mode

# set serial s0 escape-string "+++inets0"

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 180 181

Sin comentarios

Multitech MultiConnect Adapter Guía de usuario Pagina 81