Multitech MultiModem ZBA MT9234ZBA Guía de usuario descargar pdf (Pagina 18)

Chapter 4 – Remote Configuration

18 Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide

Changing the Remote Escape Character

To further improve security, you can change a remote modem’s remote configuration escape character either

locally or remotely. The remote configuration escape character is stored in register S9. The factory default is 37,

which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote configuration

entirely.

Caution: If you do this remotely, you won’t be able to change it back remotely.

1. Establish a remote configuration link with the remote modem as described in Basic Procedure.

2. Type ATS9=n, where n is the ASCII code for the new remote configuration escape character, and press Enter.

3. Save the new value by typing AT&W and pressing Enter.

4. Type ATO and press Enter to exit remote configuration.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 50 51

Sin comentarios

Multitech MultiModem ZBA MT9234ZBA Guía de usuario Pagina 18