Multitech MultiVOIP 100 MVP120 Guía de usuario descargar pdf (Pagina 17)

Configuring the MultiVOIP

Check with your in-house phone personnel to verify

whether your local PBX dial signaling is Pulse or DTMF

(tone). Select the Regeneration option accordingly.

The Inter Digit Time option defines the maximum amount

of time between dialed digits that the unit will wait before

mapping the dialed digits to an entry in the Phone

Directory Database. If too much time elapses between

digits, the wrong number will be mapped and you will hear

a rapid busy signal. If this happens, hang up and dial

again. The default setting is 2 seconds.

In the Flash Hook Timer box, enter the amount of time for

the duration of the flash hook signals output on the FXO

interface. The default setting is 600 milliseconds.

The Message Waiting Light check box must be selected

on the originating and answering voice channel. This

enables the number dialed to connect you to the

appropriate voice channel, then output that number on the

voice channel.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Sin comentarios

Multitech MultiVOIP 100 MVP120 Guía de usuario Pagina 17