Multitech MultiVOIP 400 MVP400 Guía de usuario descargar pdf (Pagina 42)

MultiVOIP Quick Start Guide

Remote Site Administrator

3. Unpack your MultiVOIP.

4. Connect one end of the power supply to a live AC outlet

and connect the other end to the Power connection on

your MultiVOIP.

FXSE&M

FXO

PSTN

Ethernet Connection

Power Connection

10BASET

ETHERNET

POWER

Voice/Fax Channel

Connections

E&M

FXO

FXS

Figure 4. Remote Site Cable Connection

5. Connect a network cable to the ETHERNET 10BASET

connector on the back of your MultiVOIP.

6. If you are connecting a station device such as an analog

telephone, a fax machine, or a Key Telephone System

(KTS) to your MultiVOIP, connect one end of an RJ11

phone cord to the Voice/Fax Channel 1 FXS connector on

the back of the MultiVOIP and the other end to the station

device.

If you are connecting a PBX extension to your MultiVOIP,

connect one end of an RJ11 phone cord to the Voice/Fax

Channel 1 FXO connector on the back of the MultiVOIP

and the other end to the PBX extension.

If you are connecting an E&M trunk from a telephone

switch to your MultiVOIP, connect one end of an RJ45

phone cord to the Voice/Fax Channel 1 E&M connector

on the back of the MultiVOIP and the other end to the

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Sin comentarios

Multitech MultiVOIP 400 MVP400 Guía de usuario Pagina 42