Multitech MULTIVOIP MVP-810ST Guía de usuario descargar pdf (Pagina 265)

100

101

MultiVOIP User Guide Technical Configuration (Analog/BRI)

265

ISDN-BRI Parameter Definitions (continued)

Field Name Values Description

Dialing

Options

Inter Digit

Timer

(value in

milliseconds)

Dialin

options are relevant when the

MultiVOIP provides dial tone either during

an overlap receiving mode or providing a

second dial tone. Default is 2000, which is 2

seconds. Range 250 ms to 10000 ms (1/4 sec

to 10 sec).

Switch Information

Country see table

below

Countr

in which MultiVOIP is operatin

with ISDN.

Operator see table

below

Indicates phone switch manufacturer/model

or refers to telco so as to specify the switching

system in question.

ISDN is implemented somewhat differently

in different switches (different software stacks

are used).

PCM Law

A-Law or

MU-Law

A-Law is an analo

-to-di

ital compression

/expansion standard used in Europe.

MU-Law is the North America standard.

Refer to the PCM-Law defaults based on

country and operator below.

TEI n

Assignment

Terminal or

Network or

both

Automatic

(Point-to-

Point)

Network –

Automatic

(Point-to-

Multipoint)

Fixed (Point-

to-Point (0-

63) TEI 0 &

TEI 1 active

TEI (Terminal Endpoint Identifier) is a

number to uniquely identify each device

connected to the ISDN. TEI Assignment

displays the value for each TEI assigned to

the BRI port. Depending on the layer 1

interface selection (Terminal or Network) and

the country selection, some fields are grayed

out (inactive) as they have no meaning for

this configuration. The TEI range is zero to 63

for Fixed and 64 to 126 for Automatic

assignment.

An interface in Network mode has the added

option of Point-to-Multipoint Automatic TEI.

This added option should be used in cases

where the interface, or BRI port, has one or

more terminal devices connected to it. This

option may also help resolve some problems

that occur when set for Point-to-Point

Automatic TEI, even with only one terminal

device connected to the interface. Point-to-

Point Automatic TEI is then to be used when

there is one network device and one terminal

device, default setting. When selecting Fixed

TEI, the connection must be Point-to-Point,

one network and one terminal device.

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 558 559

Comentarios a estos manuales

Sin comentarios

Multitech MULTIVOIP MVP-810ST Guía de usuario Pagina 265

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MULTIVOIP MVP-810ST