Multitech RouteFinder MTASR3 Manual de usuario descargar pdf (Pagina 21)

Chapter 2 – Behind NAT Setup Examples

Multi-Tech Systems, Inc. RF820/830 IPSec VPN Setup Examples – A Reference Guide 21

Example 1 – Set Up a RouteFinder with a

Tunnel to a Client Behind a NAT Device

Note: Prerequisite Steps must be completed before you start this setup.

Step 1 – Network Setup

1. Log into your RF830/RF820 and go to the Networks & Services screen.

2. Create and enter in the Name, IP Address, and Subnet Mask of the Remote WAN.

3. Click the Add button to add the new network to the list

4. Create and enter in the Name, IP Address, and Subnet Mask of the Remote VPN Client.

5. Click the Add to add the new network to the list

Note: Pictured below is an RF820 screen with the single WAN ports. The RF830 screen is the

same except for the addition of WAN2 and WAN2Interface Names.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Sin comentarios

Multitech RouteFinder MTASR3 Manual de usuario Pagina 21