Multitech ISI3334/4 Especificaciones descargar pdf (Pagina 30)

ISI3334/4 Hardware/Driver Installation Manual

2.3 S-Registers

Certain Command Mode configurations are stored in memory

registers called, S-Registers. The

command is used to assign a

value to, and to read the current value of an S-Register. To assign a

value to an S-Register, enter the letter

followed by the S-Register

number and an equals sign (

), and then a decimal response to the

message

“ENTER THE NEW VALUE IN DECIMAL FORMAT”.

read an S-Register value, enter the letter

followed by the S-

), then hit RETURN. To

verify that the S-Register value was entered correctly, enter for

example,

ATS8?

and hit RETURN. You should receive a response

of the assigned value given to that S-Register.

Number of Rings Until Modem Answers

Unit: 1 ring

Range: 0-255

Default: 0

Description: Sets the number of rings before the modem

answers.

Rings Which Have Occurred

Unit: 1 ring

Range: 0-255

Default: 0

Description: Counts the number of rings that have

occurred.

Escape Code Character

Unit: ASCII Character

Range: 0-127

Default: 43 (

+ sign

)

Description: Defines the escape code character.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 70 71

Sin comentarios

Multitech ISI3334/4 Especificaciones Pagina 30