Multitech RF560VPN Manual de usuario descargar pdf (Pagina 28)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 28

29. Verify the connection details information and click Close.

30. Click OK to close the SSH Sentinel window.

31.

Open a DOS command prompt window and attempt to PING the LAN located behind the

RF550VPN/RF560VPN. If the PING is successful, the configuration process to connect SSH Sentinel

client to an RF550VPN/RF560VPN RouteFinder is complete. If PING fails, stop and restart the

Sentinel Policy Manager. If still fails, check cabling and software configuration at both locations.

Note: The Sentinel Policy Manager may need to be stopped and started in order for you to successfully

PING the remote LAN. Once you can PING the remote LAN, do not run the diagnostics test again,

otherwise, you will have to stop and start the policy manager in order to once again PING successfully.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 41 42

Sin comentarios

Multitech RF560VPN Manual de usuario Pagina 28