Multitech MTS2EA Guía de usuario Pagina 17
- Pagina / 21
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 6 – Upgrading the Firmware and Flash
Multi-Tech Systems, Inc. Serial-to-Ethernet Device Server User Guide (S000344E) 17
Chapter 6 – Upgrading the Firmware
and Flash
Upgrading the Firmware
Prerequisites
1. Serial Port Configuration
The default serial port parameters should be:
Data length – 8 bits
Parity – None
Stop bits – 1
Baud-rate of the serial port to which the Device Server is connected should be set to 115200 bps
for proper operation.
2. Enabling TFTP Server
Enable TFTP server on MultiConnect by issuing the following command:
# set ip tftp enable
OK
Using Windows TFTP to Upgrade
1. Open Command Prompt
Open the Windows Command Prompt program:
• Click the Start button in the lower left-hand corner of your screen.
• Click Programs.
• Click Accessories.
• Double-click Command Prompt.
2. Enter the Upload Request
At the C: prompt, type:
tftp -i <ip-address> put <firmware-filename> AMD-tftp.bin
Then press Enter.
Example:
tftp -i 192.168.2.1 put c:\example.bin AMD-tftp.bin (Press Enter)
Definitions of the Upload Request Parameters:
• <ip-address>
Address of the Serial-to-Ethernet Device Server to which you are uploading the firmware
image.
• <firmware filename>
Filename under which the firmware file was saved on your PC or local network.
• AMD-tftp.bin <destination filename>
Filename must be AMD-tftp.bin. This is a case-sensitive file name; type it as shown here.
Obtaining the Latest Firmware Version
To obtain the latest version of the firmware, contact you Multi-Tech Sales Representative or contact Multi-Tech
directly by phone or email:
Phone: 763-785-3500 or 800-328-9717
See the Multi-Tech Systems, Inc. Web site http://www.multitech.com
- MultiConnect™ SE 1
- Table of Contents 3
- Specifications 4
- Product Builds Available 5
- Package Contents 5
- Handling Precautions 5
- LED Indicators 8
- Chapter 2 – Installation 9
- Installation 10
- Chapter 3 – Managing and 12
- Chapter 4 – AT Commands 13
- Introduction 14
- Server Component 15
- Upgrading the Firmware 17
- Upgrading the Flash 18
- Information 19
- Appendix A – Regulatory 19
- European Union 20
Relacionado con productos y manuales para Servidores De Serie Multitech MTS2EA
(18 paginas)Pfannenberg DTS 3181–400V / 460V manuals
Owner’s manuals and user’s guides for Conditioners Pfannenberg DTS 3181–400V / 460V.
We providing 1 pdf manuals Pfannenberg DTS 3181–400V / 460V for download free by document types: User Manual
Comentarios a estos manuales