Multitech MTASR3-200 Guía de usuario descargar pdf (Pagina 41)

Chapter 4 - RASFinder Software

MTASR3-200

from a RAS application to a routing application.

The PPP/SLIP (Point-to-Point/Serial Line Internet Protocol) button displays the PPP Port Setup

dialog box with the WAN 1 tab active. In the Remote Port Setup group in the lower right of the dialog

box, change from the Client only option to the Client or LAN (as shown below); this disables the

Client only option, and enables the RASFinder to communicate with

either

a remote client (PC) or a

LAN. The WAN 2 and WAN 3 tabs must have the Client or LAN enabled for both of these ports, too.

To bond the three WAN ports together, tripling the transfer rate between two LANs, click the Advanced

tab and enable the MLPPP (MultiLink Point-to-Point Protocol) option. Then return to the main menu.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 112 113

Sin comentarios

Multitech MTASR3-200 Guía de usuario Pagina 41