Multitech MULTI MODEM II MT5600BA Manual de usuario Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 113
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
4 AT Commands, S-Registers, and Result Codes
52
MultiModemII User Guide
S95 decimal 015 0 The bits in this register can be set to over-
ride some of the W command options. A bit
set to a 1 in this register enables the corre-
sponding result code regardless of the W
setting.
Bit 0 CONNECT result code indicates
DCE speed instead of DTE speed.
Bit 1 Append /ARQ to CONNECT XXX
result code in error-correction mode.
Bit 2 Enable CARRIER XXXX result code.
Bit 3 Enable PROTOCOL XXXX result code.
Bit 4 Reserved.
Bit 5 Enable COMPRESSION result code.
Bit 6 Reserved.
Bit 7 Reserved.
Register Unit Range Default Description
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 112 113

Comentarios a estos manuales

Sin comentarios