Multitech MT9234ZPX-UPCI Guía de usuario descargar pdf (Pagina 37)

Appendix D – Installing under Linux

Multi-Tech Systems, Inc. MT9234ZPX User Guide 37

Using AT Commands to Configure Country Code

If you are comfortable using AT commands, you can configure your modem using AT commands. You

must enter these commands in your communication program’s terminal window.

To configure the modem for a specific country, execute the following AT commands:

1. Type AT%T19,0,nn (where nn represents the country code). Press Enter.

2. The modem will respond “OK.”

3. Type AT&F&W (this saves changes). Press Enter.

4. The modem will respond “OK.”

5. Type ATI9 (this verifies that country code has been chosen). Press Enter.

6. The modem will display the country code in decimal format followed by an “OK.”

7. Check to be sure the code for your country is displayed.

If not, repeat procedure to correct.

Here are two examples of country, command, and country codes.

Country AT Command Country Code

(Hexidecimal) (Decimal)

Euro/NAM* AT%T19,0,34 (default) 52

Japan AT%T19,0,10 16

Because the list of country codes is continually being updated, we present the complete list on our

Web site: http://www.multitech.com/GlobalModem/config

1 2 ... 32 33 34 35 36 37 38 39

Sin comentarios

Multitech MT9234ZPX-UPCI Guía de usuario Pagina 37