Multitech FaxFinder V.34 Fax Servers FF Model Series Guía de usuario descargar pdf (Pagina 50)

Chapter 3 – Software

MultiAccess Communications Server MA30120User Guide 50

Networks & Services > Networks

Networks & Services

Networks & Services > Networks

A network consists of a unique name, an identifying network number, and a Subnet Mask. Once you add a

network, the information displays at the bottom of the screen. This network table contains the default networks

which cannot be deleted or edited.

Important Notes:

 IP address (network number) will change if changes are made to the IP addresses in Network Setup of

Ethernet 1 and Ethernet 2.

 To define a single host, enter its IP address and use a netmask of 255.255.255.255. Technically, single

hosts are treated in the same way as networks.

 A network or host you added can be deleted only if it is not used for any route or by any other module.

 If a network process/function is using a network, that network cannot be edited. Similarly, if a host

address is edited and changed, and if that host was used by SNAT or DNAT, the change will not be

performed.

Add Network

Name

Enter a straightforward name into the Name entry field. Networks can be used to set packet filter rules, static

routes, etc.. Accepted characters: alphabetic, numerical 0 to 9, the minus sign, and underscore. Forward

slash and backward slash are not accepted as a valid character. Maximum characters are 39.

IP Address

Enter the network number (e.g., 192.168.3.0).

Subnet Mask

Enter the Net Mask. Subnet mask 255.255.255.0. Defines a private Class-C net.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 177 178

Sin comentarios

Multitech FaxFinder V.34 Fax Servers FF Model Series Guía de usuario Pagina 50