Multitech MT5600BA Guía de usuario descargar pdf (Pagina 20)

Chapter 3 – Using the Front Panel

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 20

Key LCD Options

This section describes important LCD options. Many options have AT command equivalents.

Status Options

Status LCDs display the current status of the modem. Though limb changes are automatic, certain

options can be selected by pressing the  button.

STATUS = IDLE

The modem is ready but inactive. This LCD appears when the modem is first

turned on, and is the starting point for accessing all other LCDs. The following

options are available by pressing the  button

MANUAL ORIG.?

Places the modem in originate mode for the time

specified by register S7. Use to connect to a remote

modem by manually dialing the number on a phone

connected to the local modem. When the remote modem

answers, press Enter to establish a connection with the

remote modem. You can also use this option to

temporarily place the modem in originate mode for back-

to-back testing.

MANUAL ANSWER?

Places the modem in answer mode for the time specified

by register S7. You can use this option to temporarily

place the modem in answer mode for back-to-back

testing.

BUSY OUT MODEM?

Takes the modem out of service by putting it into an off-

hook state so that a calling modem receives a busy signal.

MODEM BUSIED

OUT

Shows that the modem is busied out. To return the

modem to normal service, you have two ways you can do

this:

● Power cycle the modem or

● Press  and then press Enter.

STATUS = ONLINE

The modem is connected to another modem. Two options are available from this

LCD by pressing the  button:

CONNECT STATUS

Example: 49333,ASYNC,LAPM

Shows the connect speed, connection type, and error

correction being used.

DISCONNECT?

Press Enter to force the modem to hang up. Same as the

ATH command.

RINGING

A remote modem or caller is attempting to establish a connection. One option is

available from this LCD by pressing the  button:

MANUAL ANSWER?

Forces the modem to answer the phone. You can use this

option to establish a connection if autoanswer is turned

off (S0=0). Same as the ATA command.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 56 57

Comentarios a estos manuales

Sin comentarios

Multitech MT5600BA Guía de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Módems Multitech MT5600BA