Multitech MT5600BA Guía de usuario descargar pdf (Pagina 22)

Chapter 3 – Using the Front Panel

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 22

COMMAND MODE

OPTIONS

The following LCDs are used to configure result code responses.

ENABLE/DISABLE

RESPONSE

Use  and Enter to enable or disable the sending

of result codes to the computer. Same as the Q0

and Q1 commands.

VERBOSE/TERSE RESPONSE

Use  and Enter to select verbose or terse result

codes. Same as the V0 and V1 commands.

ENABLE/DISABLE CMD

MODE

Use  and Enter to enable or disable the modem’s

ability to accept AT commands.

SYNC/ASYNC

OPTIONS

Use  and Enter to select the method of data transmission.

ASYNC, NORM?

Normal asynchronous transmission using the AT

command set.

ASYNC, V.25bis?

Asynchronous transmission using the V.25bis

command set.

SYNC, NORM?

Normal synchronous transmission using any

command set.

SYNC /External Clock

SYNC Slave

V.25bis BISYNC?

V.25bis bisynchronous transmission.

RESET FACTORY

DEFAULTS

Use  and Enter to reset Profile 0 and the modem’s active configuration to the

factory defaults. Same as the AT&F&W command string.

CONNECT RATE

OPTIONS

Use  and Enter to change the modem’s serial port and data transmission

speeds.

SERIAL BAUD RATE

Use  and Enter to select the modem’s serial port

speed. The valid range is 1200 to 115200 bps. Same

as the $SB commands.

MODEM SPEED

Use  and Enter to select the modulation protocol

to use in originating or answering a connection. This

also selects the maximum transmission speed at

which the modem can operate. Same as the

+MS=[mod] command.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 56 57

Comentarios a estos manuales

Sin comentarios

Multitech MT5600BA Guía de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Módems Multitech MT5600BA