Multitech MVP200 Guía de usuario Pagina 11
- Pagina / 91
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
11
Chapter 1 - Introduction and Description
Front Panel Description
The front panel has three groups of LEDs that provide the status of the Ethernet connection
(Ethernet), Voice/Fax channels (Voice/Fax 1 and 2), and general status of the MultiVOIP (Boot and
Power). The front panel is shown in Figure 1-4, and a description of each LED follows.
Figure 1-4. Front Panel
Ethernet
RCV Receive Data indicator blinks when packets are being received from the local area network.
XMT Transmit Data indicator blinks when packets are being transmitted to the local area network.
LNK Link indicator lights when the Ethernet link senses voltage from a concentrator or external
device.
COL Collision indicator lights when a collision is detected on the Ethernet link.
Voice/Fax 1 and 2
FXS Foreign Exchange Station indicator lights when the voice/fax channel is configured for FXS
operation.
FXO Foreign Exchange Office indicator lights when the voice/fax channel is configured for FXO
operation.
E&M Ear and Mouth indicator lights when the voice/fax channel is configured for E&M operation.
FAX Fax indicator lights when there is fax traffic on the voice/fax channel.
XMT Transmit indicator blinks when voice packets are being transmitted to the local area network.
RCV Receive indicator blinks when voice packets are being received from the local area network.
XSG Transmit Signal indicator lights when the FXS-configured channel is off-hook, the FXO-
configured channel is receiving a ring from the Telco, or the M lead is active on the E&M
configured channel.
RSG Receive Signal indicator lights when the FXS-configured channel is ringing, the FXO-
configured channel has taken the line off-hook, or the E lead is active on the E&M-configured
channel.
Boot
The Boot indicator lights when the MultiVOIP is booting or downloading setup.
Power
The Power indicator lights when power is applied to the MultiVOIP.
- Voice/Fax Over IP Networks 1
- Model MVP200 1
- Proprietary Mode 1
- User Guide 1
- Contents 3
- Preview of this Guide 7
- Typical Application 8
- VOIP Dialing Directory 10
- Front Panel Description 11
- Back Panel Description 12
- Specifications 13
- Chapter 2 - Installation 14
- Installing Your MultiVOIP 15
- Safety Warning Telecom 15
- Unpacking Your MultiVOIP 16
- Safety Warnings 16
- Cabling Your MultiVOIP 17
- Back Panel Connectors 19
- Voice / Fax over IP Networks 20
- Software Loading 21
- Deploy the VOIP Network 36
- Remote Site Administrator 37
- Introduction 39
- MultiVOIP Configuration 40
- Changing Channel Parameters 41
- Voice/Fax 42
- Regional 44
- Changing IP Parameters 47
- Viewing Call Progress 48
- Applications Setup 48
- Viewing Statistics 49
- Viewing Logs 51
- Viewing Log Entry Details 52
- Viewing Channel Totals 52
- Upgrade Procedures 54
- Manual Upgrade Procedure 56
- Remote Configuration 58
- LAN-Based 60
- Remote Management 62
- Voice over IP Configuration 63
- Phone Directory Database 63
- Phone Directory Configuration 63
- Web Management 64
- Limited Warranty 66
- U.S. and Canadian Customers 67
- International Distributors 68
- Replacement Parts 68
- Technical Support 68
- Internet Sites 68
- Appendixes 69
- Internet Protocol (IP) 72
- Appendix B - Cabling Diagrams 73
- Remote Configuration Cable 74
- Class A Statement 75
- Fax Branding Statement 75
- FCC Part 68 Telecom 76
- Canadian Limitations Notice 77
- Glossary 78
Pfannenberg DTS 3181–400V / 460V manuals
Owner’s manuals and user’s guides for Conditioners Pfannenberg DTS 3181–400V / 460V.
We providing 1 pdf manuals Pfannenberg DTS 3181–400V / 460V for download free by document types: User Manual
Comentarios a estos manuales