Multitech MT56DSU-R El manual del propietario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
MT56DSU-R Owner's Manual
38
4.3.4 Test Pattern Test
This test allows you to test the local MT56DSU-R, the
communications link, and the remote MT56DSU-R.
With this test enabled, the MT56DSU-R sends and detects a pre-
defined 15-bit pseudo-random test pattern. When an error is
detected by the MT56DSU-R, the NS (No Signal) LED flashs.
To enable the Test Pattern Test, perform the following.
1. Set the DIP switch # 10 on both the local and remote
MT56DSU-R boards to the down position.
2. The test pattern is generated and either detected as a good test
pattern (test patterns match) or as a failed test (test pattern
received does not match the pattern sent).
82023101.p65 2/12/01, 2:52 PM38
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

Comentarios a estos manuales

Sin comentarios