Multitech MT56DSU-R El manual del propietario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
MT56DSU-R Owner's Manual
54
LOOPBACK CABLE
DESCRIPTION
This cable lets you test the MT56DSU-R when a second DSU is not
available. It tests the DSU by having the DSU generate a signal,
then the cable loops the signal back to the DSU for comparison to
the original signal sent. You can order this cable (CADSURLB) from
Multi-Tech, or build one using the instructions below. Refer to
Chapter 4 for test procedures.
SCHEMATIC
BUILD INSTRUCTIONS
1. Strip cable insulation 3/4" .
2. Cut wires 2, 5, 6, 7,9 off.
3. Strip wires 1, 3, 4 and 8 a 1/4"
4. Solder wires 1 and 8 together.
5. Solder wires 3 and 4 together.
6. Cover solder connections with 1"of shrink tube.
82023101.p65 2/12/01, 2:52 PM54
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

Comentarios a estos manuales

Sin comentarios