Multitech MTCMR-H Guía de usuario Pagina 97

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 147
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 96
Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 97
NW CLASS
The network has forced a change of MS (MOBILE STATION) class. The highest
available class is reported.
ME (MOBILE EQUIPMENT) CLASS
The mobile equipment has forced a change of MS (MOBILE STATION) class.
The highest available class is reported.
<PDP_type> Type of Packet Data Protocol
"IP" Internet Protocol (IETF STD 5)
"PPP" Point to Point Protocol (IETF STD 51)
<PDP_addr> PDP Address
Identifies the modem in the address space applicable to the PDP
String type
<cid> PDP Context Identifier
range: 1-4
integer type
Parameter Storage: The <mode> parameter is stored in EEPROM using AT&W. The default value can
be restored using AT&F.
Examples:
Command Responses
AT+CGEREP=? +CGEREP: (0,2),(0)
OK
AT+CGEREP=2 OK
AT+CGEREP? +CGEREP: 2,0
OK
+CGEREP: ME DETACH "IP", "10.15.139.22",1
Note: PDP context deactivation
+CGMI Manufacturer Identification
Description: Displays the manufacturer identification. This command is the same as +GMI.
Syntax:
Command Response
AT+CGMI
xxxx MODEM
OK
Values: None
Examples:
Command Responses
AT+CGMI
Note: Get manufacturer identification
xxxx MODEM
OK
Note: Command valid, xxxx modem
Vista de pagina 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 146 147

Comentarios a estos manuales

Sin comentarios