Multitech MultiModem rCell Guía de usuario descargar pdf (Pagina 68)

Chapter 3 – Using the Web Management Software

68 Multi-Tech Systems, Inc. MultiModem rCell User Guide

Left Next Hop: Next Hop is the address of the next device in a routing table’s path that moves a packet to its

destination. You can configure this setting or leave it as a static value: 0.0.0.0. When not configured, the value is

set to the Gateway of the Box/Gateway configured on the Interface/Right IP. The selection is based on the Left

and Right IP.

Local WAN IP: Select the Interface to initiate the IPSec tunnel (Left Security Gateway).

Local LAN: Select the internal subnet of the local security gateway for which the security services are to be

provided. If the router acts as a host, configure as None. Other options are Any, LAN, LAN Interface, WAN 1, WAN

1 Interface.

Remote Gateway IP: Select the interface in which the IPSec tunnel ends. In the case of Road Warriors with a

Dynamic IP addresses, set to ANY. Other options include: LAN, LAN Interface, WAN 1, WAN 1 Interface, and None.

FQDN: FQDN is a Fully Qualified Domain Name that resolves to the Local Wan IP of the router or in the case of

GRE/IPSEC, it is used to identify the Wan IP of the remote location. This is provided by your ISP or created by you

if you are using a Dynamic DNS service. When FQDN is selected, leave the Remote Gateway IP blank.

Remote LAN: This is the internal subnet of the remote security gateway for which the security services are to be

provided. If the remote end is a host, set to None.

NetBIOS Broadcast: Check this option to enable broadcasts over the connection. This allows computers on the

network to share Microsoft file and printer sharing information.

Save Button: Click Save to save these settings.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 90 91

Sin comentarios

Multitech MultiModem rCell Guía de usuario Pagina 68