
Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 2
RF760VPN/RF660VPN/RF600VPN Application
Examples
PN S000283D
Copyright © 2003-5
This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech
Systems, Inc. All rights reserved. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time
in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions
or changes.
Revision Date Description
A 12/27/02 Initial release
A1 01/10/03 Updated RF550VPN to V4.63, removed SSH procedure.
A2 01/10/03 Made packet filter rule corrections.
B 01/30/04 Remove examples 2 and 3. Add RF760/660VPN for software version 3.10.
C 03/03/04 Added in examples 2 and 3.
D 11/03/04 & 01/25/05 Updated for software version 3.20 and 3.21.
The examples on the following pages illustrate:
1. A LAN-to-LAN VPN configuration between two RF760VPN/RF660VPN/RF600VPNs. One at Site A and one at
Site B. Both RouteFinders using static IP addresses at their WAN port gateways.
2. A LAN-to-LAN VPN configuration between an RF600VPN/RF660VPN/RF760VPN at Site A and an
RF550VPN/RF560VPN at Site B. Both RouteFinders using static IP addresses at their WAN port gateways.
3. A LAN-to-LAN VPN configuration between an RF600VPN/RF660VPN/RF760VPN at Site A using a static IP
address and an RF550VPN/RF560VPN at Site B using dynamic IP addressing.
4. A Client-to-LAN Configuration between RF760VPN/RF660VPN/RF600VPN at Site A and an SSH Sentinel IP
Client.
The RouteFinder software is pre-installed on the RouteFinder. Initial configuration is required in order for you to run the
Web Management program and begin operation. The browser-based interface eases VPN configuration and
management. The VPN functionality is based on IPSec and PPTP protocols and uses Triple DES 168-bit encryption to
ensure that your information remains private. These examples are based on RF600VPN/RF660VPN/RF760VPN
software version 3.21 and RF550VPN/RF560VPN firmware version 4.63.
IMPORTANT:
Any reference to RF760VPN or RF660VPN or RF600VPN configuration will apply to all three models. Any reference to
RF550VPN or RF560VPN configuration will apply to both models.
Caution: Use a safe Password! Your first name spelled backwards is not a sufficiently safe password; a password
such as xfT35$4 is better.
Comentarios a estos manuales