Multitech RF760 Manual de usuario descargar pdf (Pagina 34)

Example 3 – LAN-to-LAN Fixed IP Addresses Using RF560/550VPN

Multi-Tech Systems, Inc. RF760VPN/RF660VPN/RF600VPN Setup Examples Reference Guide (S000283D) 34

Testing the Site B Workstation Connected to LAN Port of RF560VPN/RF550VPN:

a) At the DOS prompt ping a workstation connected to the LAN port of the RF660VPN at Site A.

Example: Ping 192.168.2.100 <return>

You should see four successful packet transmit/receive statements. If you do not, try several more times. You

may see several initial failures while the two RouteFinders make a secure connection.

b) If this fails, try to ping the WAN port of the RF660VPN at Site A.

Example: Ping 204.26.122.103

You should see four successful packet transmit/receive statements. If you do not, try several more times. You

may see several initial failures while the two RouteFinders make a secure connection.

c) If this fails, try to ping the WAN port of the RF560VPN/RF550VPN at Site B.

Example: Ping 204.26.122.3

Note: If any of these tests fail then verify that the workstation is connected to a LAN port of the

RF560VPN/RF550VPN. The LAN port LINK LED should be on and the ACT LED should blink on each time you ping

the RF560VPN/RF550VPN. Also verify that the RF550VPN is configured properly.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39

Sin comentarios

Multitech RF760 Manual de usuario Pagina 34