Multitech MT5634HD16 Guía de usuario descargar pdf (Pagina 204)

RASExpress User Guide

194 CommPlete Communications Server

From the PPP Configuration window, you can edit the following PPP parameters for

a selected WAN port. To choose a port to edit, select Port Name and press E

NTER. A

List of Lines menu appears, from which you can select the desired port.

Port Name

Shows the name of the port you are configuring. Press E

NTER to select another port to

configure.

Port Type

Select the type of connection the port is to be used for: Client-to-LAN or LAN-to-

LAN. Select Client-to-LAN if the PPP peer is a dial-up client. Select LAN-to-LAN if

the PPP peer is a dial-up client or another router. If you change the connection type,

be sure to change the IP address also.

SLIP

This field shows the status of the Serial Line Internet Protocol (SLIP) for the selected

port. Enable SLIP if you have SLIP clients dialing into the RASExpress server.

Data Compression

Select Enable to enable PPP data compression for the port. Enable data compression

only if the data link is slower than 57,600 bps and the modem is not doing any data

compression. Disable it if the data link is 57,600 bps or faster or if the modem is doing

data compression.

Maximum Receive Unit (MRU)

This field shows the PPP maximum receive unit (MRU) for the port, in the range 0–

1534. The MRU is the packet size in bits.

Async Control Map (ACCM)

This field shows the PPP asynchronous character control map for the port, in the

range 0–FFFFFFFF.

Dial on Demand

This field is used only for LAN-to-LAN operations. Enable it if you want to discon-

nect the line during idle times and connect only when you have to transfer data. If

this option is enabled, RASExpress spoofs all watchdog and serialization packets.

Authentication Protocol

This field shows the PPP authentication protocol for the port. You can choose PAP

(Password Authentication Protocol), CHAP (Challenge Handshake Authentication

Protocol), or None.

User Name

Type a user name here for use in LAN-to-LAN security. For a client-to-LAN configu-

ration, leave this field blank.

Password

Type a password here for use in LAN-to-LAN security. The password is case-

sensitive, and must match the password at the other end of the PPP connection. For a

client-to-LAN configuration, leave this field blank.

IPXCP

Select Enabled to enable IPX for the selected port. Select Disabled to disable IPX, so

that it will be unavailable for remote dial-in clients. IPXCP is a PPP network control

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 291 292

Comentarios a estos manuales

Sin comentarios

Multitech MT5634HD16 Guía de usuario Pagina 204

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MT5634HD16