Multitech MULTIVOIP MVP-810 Guía de usuario descargar pdf (Pagina 114)

Chapter 6—Using the Software

114 MultiVOIP® Voice/Fax over IP Gateways

Logs Window Details: Field Definitions

Field Name

Values

Description

Log # column

1 or higher

All calls are assigned an event number in chronological order, with the most

recent call having the highest event number.

Start Date,Time

column

dd:mm:yyyy

hh:mm:ss

The starting time of the call. The date is presented as a day and a month of one or

two digits, and a four-digit year. This is followed by a time-of-day in a two-digit

hour, a two-digit minute, and a two-digit seconds value.

Duration column

hh:mm:ss

How long the call lasted in hours, minutes, and seconds.

Type

H.323, SIP, SPP

Indicates the Call Signaling protocol used for the call (H.323, SIP, or SPP).

Status column

success or failure

Displays the status of the call (whether the call was completed or not).

IP Direction

incoming, outgoing

Indicates if the call is "incoming" or "outgoing" with respect to the gateway.

Mode column

voice or FAX

Indicates whether the event being described was a voice call or a FAX call.

From column

gateway name

Displays the name of the voice gateway that originates the call.

To column

gateway name

Displays the name of the voice gateway that completes the call.

Special Buttons

Displays log entry before currently selected one.

Displays log entry after currently selected one.

First

Displays first log entry

Last

Displays last log entry.

Delete File

Deletes selected log file.

Call Details

Voice coder

Coder protocol

The voice coder being used on this call.

Disconnect Reason

"Normal" or "Local"

disconnection.

Indicates whether the call was disconnected simply because the desired

conversation was done or some other irregular cause occasioned disconnection

(for example, a technical error or failure).

DTMF Capability

inband,

out of band

Expressions differ slightly

for different Call

Signaling protocols.

Indicates whether the DTMF dialing digits are carried "Inband" or "Out of Band."

The corresponding field values differ for the 3 different VOIP protocols.

For H.323, this field can display "Out of Band" or "Inband". For SIP it can display

either "Out of Band RFC2833" or "Out of Band SIP INFO" to indicate the out-of-

band condition or "Inband" to indicate the in-band condition. For SPP it can

display "Out of Band RFC2833" or "Inband".

Outbound Digits

Received

0-9, #, *

The digits, sent by MultiVOIP to PBX/telco, that were acknowledged as having

been received by the remote VOIP gateway.

Outbound Digits

Sent

0-9, #, *

The digits transmitted by the MultiVOIP to the PBX/telco for this call.

Server Details

n.n.n.n

When the MultiVOIP is operating in the non-direct mode (with Gatekeeper in

H.323 mode; with proxy in SIP mode; or in the client/server configuration of SPP

mode), this field shows the IP address of the server that is directing IP phone

traffic.

Packets sent

integer value

Number of data packets sent over the IP network in the course of this call.

Packets received

integer value

Number of data packets received over the IP network in the course of this call.

Packets lost

integer value

Number of voice packets from this call that were lost after being received from

the IP network.

Bytes sent

integer value

Number of bytes of data sent over the IP network in the course of this call.

Bytes received

integer value

Number of bytes of data received over the IP network in the course of this call.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 162 163

Comentarios a estos manuales

Sin comentarios

Multitech MULTIVOIP MVP-810 Guía de usuario Pagina 114

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Multitech MULTIVOIP MVP-810