Multitech PROXYSERVER MTPSR1-120 Guía de usuario descargar pdf (Pagina 22)

Firewall User Guide

Default WAN Link Configuration

The Default WAN Link(s) Setup dialog box is used only if a device is connected to the RS-232/

V.35 connector on the back panel of the Firewall. This connection enables your Secure (private)

LAN to be connected to a local ISP for Internet service.

However, if you are using the LAN 2 port, then you will have to

disable

the RS-232/V.35 WAN

port on this dialog box.

14. If a cable modem, DSL modem, or Internet LAN is connected to LAN 2, click OK and

proceed to step 19 to download the default setup.

If a device is connected to the RS-232/V.35 connector on the back of the Firewall,

proceed to step 15.

15. Click the down arrow for Modem Type and select from the listing the type of device that

is connected to the RS-232/V.35 connector.

16. Click the Dial Number field and enter the phone number supplied by your ISP. The

number can be a standard local number or it can include a long distance prefix.

17. Click the User Name field and enter the user name you negotiated with your ISP. The

User Name can be up to 40 alphanumeric characters and is not case sensitive.

18. Click Password and enter the password you negotiated with your ISP. The password

can be up to 15 alphanumeric characters and also is not case sensitive.

19. Turn on power to the Firewall and the following dialog box is displayed.

Click OK to proceed.

20. The Writing Setup dialog box is displayed as the setup configuration is written to the

Firewall.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Sin comentarios

Multitech PROXYSERVER MTPSR1-120 Guía de usuario Pagina 22