Multitech RF825-C-NX-AP Manual de usuario descargar pdf (Pagina 23)

Chapter 2 – Behind NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 23

The Add an IKE Connection screen displays. All settings can be left at the default unless

otherwise indicated:

1. Connection Name: Enter in the name of the VPN tunnel you want to create

2. Secret: Enter in the Secret (which has to match on both ends of the tunnel)

3. Local WAN IP: Select WAN1

4. Local LAN: Select LAN

5. Remote LAN: Select VPN-client

6. UID: Click the UID box to enable UID.

7. Local ID: Enter the WAN IP Address of the RouteFinder.

8. Remote ID: Enter the WAN IP Address of the remote device that is acting as the VPN

tunnel. This can be the address number or the name you have given it.

9. Click the Save button to save your tunnel settings.

Note:

Make sure to check the Status box at the bottom of the screen on the left side to activate the

newly created tunnel.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

Sin comentarios

Multitech RF825-C-NX-AP Manual de usuario Pagina 23