Multitech RF825-C-NX-AP Manual de usuario descargar pdf (Pagina 9)

Chapter 1 – Non-NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 9

Note:

Make sure to check the Status box at the bottom of the screen on the left side to activate the

newly created tunnel.

Step 4 – Save and Restart

Select the Save and Restart button located just under the menu bar. The Save and Restart

screen displays.

Save to Flash Memory

If a connection is established, then the settings have been entered correctly and your basic

configuration is now complete. Now, you must save your settings to the Flash Memory; this saves

the current settings in the flash prom and prevents settings from getting lost at the next power up.

Restart

This is optional. You do not have to restart the RouteFinder after saving to the flash memory.

Step 5 – Checking the Tunnel

To see if the tunnel is up you can click on Statistics & Logs and go to the IPSec Live Log. You

will see whether or not the connection is up. You will also see information about the data, if any,

that is being sent across the tunnel.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Sin comentarios

Multitech RF825-C-NX-AP Manual de usuario Pagina 9