Multitech RF825-C-NX-AP Manual de usuario descargar pdf (Pagina 30)

Chapter 2 – Behind NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 30

The Add an IKE Connection screen displays. All settings can be left at the default unless

otherwise indicated:

1. Connection Name: Enter in the name of the VPN tunnel you want to create

2. Secret: Enter in the Secret (which has to match on both ends of the tunnel)

3. Local WAN IP: Select WAN1

4. Local LAN: Select LAN

5. Remote LAN: Select remote-WAN.

6. UID: Click the UID checkbox to enable UID.

7. Local ID: Enter the IP Address of the RouteFinder’s WAN IP.

8. Remote ID: Enter IP Address of the remote device that is at the other end of the VPN

tunnel.

9. Click the Save button to save your tunnel.

Note:

Make sure to check the Status box at the bottom of the screen on the left side to activate the

newly created tunnel.

1 2 ... 25 26 27 28 29 30 31 32 33

Sin comentarios

Multitech RF825-C-NX-AP Manual de usuario Pagina 30