Multitech RF825-E-AP Guía de usuario descargar pdf (Pagina 10)

RouteFinder RF825 Series Quick Start Guide

9. Open a Web browser and complete the following:

• In the Address bar type http://192.168.2.1

This opens the Routefinder's Web Management software.

See the User Guide for more about the software.

• Click Go.

• The Login screen displays.

• Type the following:

For Username: admin.

For Password: admin

10. Once you are logged in, you must setup the PPP functionality.

Select Network Setup from the Menu bar, and then select PPP

Cellular/Analog Backup when the Network Setup screen displays.

See the User Guide for an example of this screen.

Enter the following on the PPP Cellular/Analog Backup screen to

configure the PPP dialer:

Status: Check this box to enable PPP.

Dial-on-Demand: Select Disable (select disable to stay

connected at all times).

Idle time out: 0 (zero indicates that the connection will not

disconnect)

User Name: Enter your user name. There is no default.

Password: Enter your password. There is no default.

Baud Rate: For CDMA models, select 115200.

For EDGE models, select 230400.

1 2 ... 5 6 7 8 9 10 11 12

Sin comentarios

Multitech RF825-E-AP Guía de usuario Pagina 10