Multitech RF825-E-AP Guía de usuario descargar pdf (Pagina 4)

RouteFinder RF825 Series Quick Start Guide

Front and Back Panels

CDMA Front Panel

EDGE Front Panel

LEDs Description

Power

Lights when power is being supplied to the RouteFinder.

Status

When functioning normally, the LED blinks. The LED is a

solid light when the RouteFinder is booting up, saving the

configuration, restarting, or updating the firmware.

LAN

10/100M

Lights when a successful connection to the 100BaseT LAN

is established. Off when connected to the 10BaseT.

LAN Link/

ACT

Lights when the LAN port has a valid Ethernet connection.

Blinks when it is receiving or transmitting data.

WAN

10/100M

Lights when a successful connection to the 100BaseT

WAN is established. Off when connected to the 10BaseT.

WAN Link

ACT

Lights when the WAN port has a valid Internet connection.

Blinks when it is receiving or transmitting data.

Modem TD Transmit Data. Blinks when the modem is

transmitting data to your wireless carrier.

RD Receive Data. Blinks when the modem is receiving

data from your wireless carrier.

CD Carrier Detect. Lights when the modem detects a

valid carrier signal from a wireless carrier.

TR (Data) Terminal Ready. Lights when the modem is

trying to establish a wireless connection.

LS Link Status.

EDGE: Blinks when there is network activity between

carrier and cellular module. Otherwise, light will be off.

CDMA: Continuous “on” – The wireless modem is

not registered on the network.

Flashing – Network registration OK.

Off – Modem is off (not ready) or in download mode.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Multitech RF825-E-AP Guía de usuario Pagina 4