Multitech MT5634HD16 Guía de usuario descargar pdf (Pagina 42)

MT5634HD8/16 User Guide

36 CommPlete Communications Server

S8 determines the length of the pause caused by a comma character in a dialing command. The default

setting is two seconds for the North American model, and four seconds for the International and U.K.

models. S8

may be set for up to 65 seconds. S8

also defines the length of time the modem waits before

retrying a call after it detects a busy signal. Some computer systems need more than two seconds to reset,

in which case you should increase the value of S8.

S10 Carrier Loss Disconnect Delay Time

Unit: 100 ms

Range: 1–254

Default: 20

S10

defines the length of time, in milliseconds, that the modem waits after a loss of carrier signal before

the it disconnects. The default setting is 2000 ms (20 units of 100 ms each). Maximum delay is 25400

milliseconds, or 25.4 seconds (decimal 254).

S11 Tone Dialing Spacing and Duration

Unit: 1 ms

Range: 50 - 150 (USA) or 80–255 (Canada, U.K., International)

Default: 95 (USA) or 80 (Canada, U.K., International)

S11 sets the speed of tone dialing (spacing and tone duration times). The default value is 95 units for

domestic models and 80 units for Canadian and International models, where each unit is one ms. In other

words, for domestic modems, each tone is sustained for 95 ms followed by a 95 ms pause. The minimum

S11

value allowed is 50 ms (50 units). The maximum S11 value is 150 ms (150 units).

S28 Enable / Disable V.34 Modulation

Unit: decimal

Range: 0, 1–255

Default:1 (enabled)

S28

enables or disables V.34 modulation. Setting S28 to zero (0) disables V.34 modulation. Any other

setting (1-255) enables V.34 modulation.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Sin comentarios

Multitech MT5634HD16 Guía de usuario Pagina 42