Multitech MT5634HD16 Guía de usuario descargar pdf (Pagina 24)

MT5634HD8/16 User Guide

18 CommPlete Communications Server

$ Detect Call Card Tone

Use the $ command to dial services that require you to enter your call card number after a tone. The $

character in the dialing string causes the modem to pause and wait for an AT&T call card “bong” or a 1600

Hz tone. When the modem detects the tone, it processes the rest of the dialing string. If it does not detect

the tone within the time set in register S7, the modem stops processing the dial string with a

CARRIER

message. Pressing any key also terminates the $ command.

@ Quiet Answer

Use the @ command to access a system that does not provide a dial tone. The @ command causes the

modem to wait before processing the next character in the dialing string. The wait is for one or more rings

back followed by five seconds of silence.

For example,

ATDT5551212@6313550 causes the modem to dial the first number (555-1212), then

wait for the time specified in register S7

for at least one ringback and five seconds of silence. If the modem

detects a busy signal, it hangs up and generates a

BUSY

result code. If it does not detect five seconds of

silence, it hangs up and generates a

NO ANSWER result code. If it does detect five seconds of silence, it

dials the second number (631-3550).

^ Disable Data Calling Tone Transmission

Use the ^ command to disable the transmission of data calling tones.

In the following example, the ^ command is used to tone dial 555-1212 and suppress data calling tone

transmission.

ATDT^5551212

Phone Number Memory Commands

The modem can store up to four telephone numbers in nonvolatile memory. You can store the numbers

with the &Z command and dial them with the ATDS command.

&Zn=s Store a Phone Number

= phone number

= 0, 1, 2 or 3

Default: none

You can store a telephone number string in the modem’s phone number memory. You can store four of

these strings using the &Zn=s command. The memory locations are labeled

through

For example, the telephone number 1-612-555-1212 is stored at memory location N2 by typing

&Z2=16125551212 and pressing ENTER.

DSn Dial a Stored Number

= 0, 1, 2, or 3

Default: none

You can automatically dial a telephone number that is stored in the modem’s number memory by typing

ATDSn, where

= 0 through 3. For example, you can dial a number stored at N2 by typing ATDS2 in

terminal mode and pressing E

NTER.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

Comentarios a estos manuales

Sin comentarios

Multitech MT5634HD16 Guía de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Módems Multitech MT5634HD16