Multitech MT5634HD16 Guía de usuario descargar pdf (Pagina 59)

E AT Command Summary

CommPlete Communications Server 53

Command Values Description

Sr=n r = 0–8,

10-11, 28, 35,

37, 42-43, or

89; n varies

Set Register Value

Set value of S-register r to value of n, where n is

entered in decimal format.

Sr? r = 0–8

10-11, 28, 35,

37, 42-43,

or 89

Read Register Value

Read value of S-register r and display value in 3-digit

decimal form.

&Sn n = 0 or 1 Data Set Ready Control

*** &S0 Force DSR high (on).

&S1 Let DSR follow CD.

T In dialing

command

*** Tone-Dial

Modem tone-dials numbers following the T.

&Tn n = 0, 1, 3 n/a Self-Test Commands

or 6 &T0 Stop any test currently in progress.

&T1 Local analog loop test.

&T3 Local digital loopback test.

&T6 Remote digital loopback test.

\Tn n = 0 Inactivity Timer

*** \T0 Disable inactivity timer.

V In dialing

command

Switch to Speakerphone Mode

Switches to speakerphone mode and dials the

following number. Use ATH command to hang up.

Vn n = 0 or 1 Result Codes (Verbose/Terse)

V0 Result codes sent as digits (terse response).

*** V1 Result codes sent as words (verbose

response).

&V n/a View Current Configuration

Display the active modem settings.

\Vn n = 0 or 1 Protocol Result Code

\V0 Do not append protocol result code to DCE

speed.

*** \V1 Append protocol result code to DCE speed.

W In dialing Wait for New Dial Tone

command Causes modem to wait for new dial tone. (X2, X4, X5,

X6, or X7 must be selected.)

&Wn n = 0 Store Configuration

&W0 Store current settings in NVRAM; modem will

load these at power-on or with the ATZ

command instead of reading factory ROM

48 pin

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Comentarios a estos manuales

Sin comentarios

Multitech MT5634HD16 Guía de usuario Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Módems Multitech MT5634HD16