Multitech MT2834ZDX Especificaciones descargar pdf (Pagina 57)

4 AT Commands, S-Registers, and Result Codes

Command: &RN Rate Negotiation

Values: n/a

Description: Forces the modem to perform a rate renegotia-

tion while on line. You must escape to command

mode to issue this command.

Command: &RP Immediate Line Probe

Values: n/a

Description: Initiates a retrain that makes the processor read

line probe information if %DP1 is selected. Valid

only when on line in V.34 mode.

Command: &RR Immediate Retrain

Values: n/a

Description: Forces the modem to perform an immediate

retrain while on line. You must escape to

command mode to issue this command.

Command: $R

Retransmit Count

Values:

= 0 or 1

Default: 0

Description: $R0 Disconnect after 50 retransmits of a data block.

$R1 Do not disconnect after 50 retransmits.

Command: S

Set Register Value

Values:

= S-register number;

varies

Default: None

Description: Set value of register S

to value of

, where

entered in decimal format.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 103 104

Sin comentarios

Multitech MT2834ZDX Especificaciones Pagina 57