Multitech MT2834ZDX Especificaciones descargar pdf (Pagina 63)

4 AT Commands, S-Registers, and Result Codes

Command: $ Call Card Tone Detect

Values: n/a

Description: Placed in dial command, causes modem to wait

for a call card tone before processing next part of

command (such as a call card number).

Command: %%%AT<CR> Remote Configuration Escape Sequence

Values: n/a

Description: Initiates remote configuration mode while online

with remote modem. The remote configuration

escape character (%) is defined in register S13.

Command: +++AT<CR> Escape Code

Values: n/a

Description: Puts modem in command mode (and optionally

issues a command) while remaining on line.

Enter +++AT, up to ten command characters (or

as defined by S34), and a RETURN. Used mostly

to issue hang-up command: +++ATH<CR>.

Command: <BREAK>AT<CR> Escape Sequence

Values: n/a

Description: Alternate escape method. Puts modem in com-

mand mode while remaining on line. Send a

<BREAK> signal followed by AT, up to sixty

command characters, and a RETURN. You must

set the modem to %E2 or %E3 before you can

use this escape method.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 103 104

Sin comentarios

Multitech MT2834ZDX Especificaciones Pagina 63