Multitech MT2834ZDX Especificaciones Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
4 AT Commands, S-Registers, and Result Codes
53
Command: X
n
Result Codes and Call Progress Selection
Values:
n
= 0–4
Default: 0
Description: X0 Basic result codes (
CONNECT
only); does not
look for dial tone or busy signal.
X1 Extended result codes (
CONNECT 28800,
CONNECT 33600
, etc.); does not look for dial
tone or busy signal.
X2 Extended result codes with
NO DIALTONE
; does
not look for busy signal.
X3 Extended result codes with
BUSY
; does not look
for dial tone.
X4 Extended result codes with
NO DIALTONE
and
BUSY
.
Command: #X
n
Number of XOFF Characters Sent
Values:
n
= 0 or 1
Default: 0
Description: #X0 Single XOFF character sent after buffer is full.
#X1 Multiple XOFF characters sent (one for every
character received after buffer is full).
Command: Y
n
Long Space Disconnect
Values:
n
= 0 or 1
Default: 0
Description: Y0 Disable sending or responding to long space
break signal on disconnect.
Y1 Enable sending or responding to long space
break signal on disconnect. (Both modems must
have Y1 set.)
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 103 104

Comentarios a estos manuales

Sin comentarios