Multitech MT9234ZBAUSBCDC Guía de usuario Pagina 2
- Pagina / 66
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Copyright and Technical Support
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H) 2
AT Commands Reference Guide for the MultiModem and SocketModem MT9234 Series
MT9234SMI
MT9234ZBA
MT9234ZBA-USB
MT9234MU
MT9234ZPX-UPCI
MT9234ZPX-PCIE
ISI9234PCIE
PN S000434H, Version H
Copyright
This publication may not be reproduced, in whole or in part, without prior expressed written permission
from Multi-Tech Systems, Inc. All rights reserved.
Copyright © 2007-2010, by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and
specifically disclaim any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes
from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person
or organization of such revisions or changes.
Revisions
Revision Level Date Description
E 01/02/09 Added the Quick Connect Command $FC. Removed +VLS values 8-15
(only values 1-7 are supported).
F 04/28/09 Updated the "Country/Regional Code Configuration" chapter. Changed
the syntax for +GCI. Added a note to the following commands that they
do not with parallel, USB, PCI, PCIe:
%DC, %DT, %H, %S, $D, $EB, $LB, $RP, $SB, #P, #S, and all Callback
Security Commands.
G 02/04/10 $FC Quick Connect has changed values and default:
0 = No quick connect; 1 = Sets quick connect speed at 1200; 2 = Sets
quick connect speed at 2400; Default = 0.
Changed +GCI syntax to +GCI=
H 11/10/10 Added a note to &Z regarding Storing Dialing Location and Number for
Callback Security.
Added Fax Class 2.0 to +FCLASS.
Added the $RP? function to $RP.
Changed the description of #S Enter Setup Password.
Added Callback Security password to #S= Store Setup Password.
Under the section listing commands that change when in Voice Mode,
deleted commands A and I.
Changed the values in +VGR.
Changed the values in +VGT.
For +VSM, changed the <cml> values, added a Response section,
added the +VSM? default, and changed the example for AT+VSM=?
Trademarks
Multi-Tech registered trademarks include the Multi-Tech logo, MultiModem, and SocketModem.
Technical Support
Please refer to the Copyright/Technical Support page in the product User Guide or Developer Guide.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112
Phone: 763-785-3500 or 800-328-9717
Fax: 763-785-9874
Internet Address: http://www.multitech.com
- Contents 3
- Chapter 1 – AT Commands, S 6
- Registers, and Result Codes 6
- Data and General Commands 7
- E Echo Command 9
- H Hook Control 9
- I Request ID Information 10
- M Monitor Speaker Mode 10
- N Modulation Handshake 11
- Sr S-Register Control 12
- T Select Tone Dialing 12
- V Result Code Format 12
- W Result Code Options 12
- &S Data Set Ready (DSR) 16
- &T Self-Test Commands 16
- \B Transmit Break 18
- \K Break Control 18
- \T Inactivity Timer 19
- \V Protocol Result Code 19
- \X XON/XOFF Pass-Through 20
- -C Data Calling Tone 20
- %C Data Compression Control 21
- %DC AT Command Control 21
- %S Command Speed Response 22
- +DS44 V.44 Data Compression 25
- +ER Error Control Report 26
- +ES Error Control Selection 27
- +GMR Revision Request 29
- +IPR Fixed DTE Rate 29
- +MS Modulation Selection 30
- $D DTR Dialing 32
- $FC Quick Connect 32
- $LB Long Break 32
- $MB Online BPS Speed 33
- $SB Serial Port Baud Rate 33
- +VDR Distinctive Ring Report 34
- #P Set 11-bit Parity 34
- #S Enter Setup Password 34
- #S= Store Setup Password 34
- +VCID Caller ID Selection 35
- Callback Security Commands 36
- #CBP Callback Parity 37
- #CBS Callback Enable/Disable 37
- S-Registers 38
- Result Codes 41
- Chapter 4 – Voice Commands 43
- Voice S-Register Summary 44
- Voice Commands 44
- Support 44
- Voice +V Commands Detail 45
- +VTS Send Voice Tone(s) 46
- +VRN Ringback Timer 50
- Flow Control 57
- Voice Mode Result Codes 57
- Voice Mode Shielded Codes 59
- DTE/DCE Interface Rates 61
- Configuration 62
Relacionado con productos y manuales para Redes Multitech MT9234ZBAUSBCDC
Redes Multitech MTCBA-C-N12 Manual de usuario
(17 paginas)
(17 paginas)
Redes Multitech MTSMC-G-F1 Especificaciones
(26 paginas)
(26 paginas)
Redes Multitech MULTIVOIP MVP-810ST Guía de usuario
(559 paginas)
(559 paginas)
Redes Multitech MT9234ZPX-UPCI Especificaciones
(8 paginas)
(8 paginas)
Redes Multitech BL-Series Manual de usuario
(60 paginas)
(60 paginas)
Redes Multitech FaxFinder FF240-IP Especificaciones
(90 paginas)
(90 paginas)
Redes Multitech MT5656SMI Manual de usuario
(65 paginas)
(65 paginas)
Redes Multitech MT5634ZBA-USB Manual de usuario
(33 paginas)
(33 paginas)
Redes Multitech MTCBA-C-IP-N1 Especificaciones
(253 paginas)
(253 paginas)
Redes Multitech ISI5634UPCI/4 Guía de usuario
(22 paginas)
(22 paginas)
Redes Multitech GPRS Manual de usuario
(74 paginas)
(74 paginas)
Redes Multitech GFU19 Manual de usuario
(14 paginas)
(14 paginas)
Redes Multitech MT9234SMI-P-92 Especificaciones
(203 paginas)
(203 paginas)
Redes Multitech GPRS Guía de usuario
(29 paginas)
(29 paginas)
Redes Multitech BL-Series Manual de usuario
(60 paginas)
(60 paginas)
Redes Multitech rCell 500 Series Manual de usuario
(15 paginas)
(15 paginas)
Redes Multitech MT5656ZDX Series Guía de usuario
(55 paginas)
(55 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.091 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales