Multitech MT9234ZBAUSBCDC Guía de usuario descargar pdf (Pagina 32)

Chapter 1 – AT Commands, S-Registers, and Result Codes

Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H) 32

$D DTR Dialing

Description: Dials the number in a memory location.

Note: This command does not work with parallel, USB, PCI, PCIe.

Syntax: AT$D<value>

Values: 0 Disables DTR dialing.

1 Dials the number in memory location 0 when DTR goes high.

Default: 0

Result Codes: OK

ERROR

$EB Asynchronous Word Length

Description: Enables 10-bit or 11-bit mode.

Note: This command does not work with parallel, USB, PCI, PCIe.

Syntax: AT$EB<value>

Values: 0 Enables 10-bit mode.

1 Enables 11-bit mode.

Default: 0

$FC Quick Connect

Description: Sets quick connect.

Syntax: AT$FC<value>

Values: 0 No quick connect

1 Sets quick connect speed at 1200

2 Sets quick connect speed at 2400

Default: 0

$LB Long Break

Description: Sets the length of a break sent to the DTE by the modem when received from the

remote side.

Note: This command does not work with parallel, USB, PCI, PCIe.

Syntax: AT$LB=<value>

Values: 0-255 in 10 ms increments

Default: 30 (300 ms break)

$LL Implements V.34 Handshake

Description: Implements V.34 handshake per leased line specification or per standard

specification.

Syntax: AT$LL<value>

Values: 0 Implements V.34 handshake per standard specification.

1 Implements V.34 handshake per leased line specification.

Default: 0

Result: OK if 0 or 1

ERROR if not 0 or 1

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 65 66

Sin comentarios

Multitech MT9234ZBAUSBCDC Guía de usuario Pagina 32