Multitech MTCMR-E1 Guía de usuario descargar pdf (Pagina 8)

MultiModem rCell Intelligent Wireless Router

8 Multi-Tech Systems, Inc. Quick Start Guide

● Enter the PC IP Address. Example: 192.168.2.x.

Note: The x in the address stands for numbers 101 and up.

● Enter the PC Subnet Mask. Example: 255.255.255.0

● Enter the PC Default Gateway. Example: 192.168.2.1

Note: The PC settings must be in the same subnet range as

the router.

The factory default settings for the router are:

IP Address: 192.168.2.1

Subnet Mask: 255.255.255.0

● Select Use the following DNS server addresses.

● Enter the IP Address for the Preferred DNS Server.

Example: 205.171.3.65

● Click OK.

● Close the Local Area Properties screen by clicking OK.

● Close the Control Panel.

● Repeat these steps for each PC on your network.

Web Management Software Configuration

1. From the PC, open a Web Browser.

Type the default Gateway Address: http://192.168.2.1

2. Login

After entering the Address, the Login screen displays.

● Type the default User name: admin (all lower-case).

● Type the default password: admin (all lower-case).

User Name and Password Note: The User name and Password

are case-sensitive (both must be typed in lower-case). A password

can be up to 60 characters. If Windows displays the AutoComplete

screen, you may want to click No to tell the Windows OS not to

remember the password; this helps maintain PC security.

Click the Login button. The Web Management Home screen

displays.

3. Use the Setup Wizard for Quick Configuration

● To begin configuration, click the Wizard Setup button located

under the menu bar.

● After clicking the Wizard Setup button, the Wizard Setup screen

displays.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Multitech MTCMR-E1 Guía de usuario Pagina 8