Multitech MTCMR-E1 Guía de usuario descargar pdf (Pagina 9)

MultiModem rCell Intelligent Wireless Router

Multi-Tech Systems, Inc. Quick Start Guide 9

Setup Wizard Screen

IP Configuration

IP Address – The default is 192.168.2.1. To change it, simply enter

your own IP address.

Mask – The default is 255.255.255.0

DNS – Enter the primary DNS IP address for the system. The default

is 0.0.0.0

PPP Configuration

PPP – The default is Disable. To connect to the internet, you have

to enable PPP.To issue commands to the modem, PPP must be

disabled and telnet port 5000 used.

Dial-on-Demand – The default is Disabled.

Idle Time Out – Sets the amount of time the PPP link stays active

before disconnecting. Setting the value to zero causes the link to

stay active continuously.

Dial Number – Enter the dial number.

For GSM, the number is *99***1#.

For CDMA, the dial number is #777.

APN – Enter the APN (Access Point Name) for GSM. The APN is

assigned by your wireless service provider.

APN does not apply for CDMA models.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Multitech MTCMR-E1 Guía de usuario Pagina 9