Multitech MT2834ZPX Guía de usuario descargar pdf (Pagina 10)

Command Function/Options

$Rn Retransmit.

* $R0 Disconnect after 12 retransmits in Reliable Mode.

$R1 Unlimited retransmits in Reliable Mode.

&RFn Clear to Send (CTS) and Request to Send (RTS) Signals.

&RF0 CTS follows RTS.

* &RF1 CTS functions independently from RTS.

Sr=n Sets S-Register "r" to the value "n", where "n" is entered in decimal format.

Sr? Reads the value of S-Register "r" and displays the value in 3-digit decimal format.

&SFn Data Set Ready (DSR) and Data Carrier Detect (DCD) Signals.

* &SF0 DSR follows DCD.

&SF1 DSR functions independently from DCD.

&Sn Data Set Ready (DSR) Signal.

&S0 Force DSR On.

* &S1 Normal DSR.

&S2 DSR forced ON until disconnect. Follows Register S24.

T Tone Dial. Modem will tone dial numbers following the T command.

&Tn Remote Digital Loopback.

&T4 Enable Remote Digital Loopback.

* &T5 Disable Remote Digital Loopback.

$Tn Calling Tones.

&T0 Enable calling tones (1300 Hz Data/Modem Mode Only).

* &T1 Disable calling tones (1300 Hz Data/Modem Mode Only).

#Tn Trellis Encoding.

#T0 Disable Trellis Encoding.

* #T1 Enable Trellis Encoding.

Un Loopback.

U0 V.54 Analog Loop Originate Mode.

U1 V.54 Analog Loop Answer Mode.

U2 V.54 Remote Digital Loopback Test Mode.

U3 V.54 Local Digital Loopback Test Mode.

Vn Terse/Verbose Result Codes.

V0 Terse Response (Result Codes sent as digits).

* V1 Verbose Response (Result Codes sent as words).

#Vn V.32terbo Mode. Allows user to bypass the V.32terbo handshaking process.

#V0 Enables V.32terbo in originate/answer modes.

* #V1 Disables V.32terbo in originate/answer modes.

W Wait for Second Dial-Tone.

3-6

SRM-100 - AT Command Reference Guide; Multi-Tech Format AT Command Set

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sin comentarios

Multitech MT2834ZPX Guía de usuario Pagina 10